Concrete Coatings & Decorative Concrete in Fort Worth, TX
Epoxy & polyaspartic garage floors, stamped concrete, pool decks, and decorative finishes — built for Texas heat. One licensed crew, no subcontractors, no surprises.
More than a fresh look — concrete that finally performs
Bare concrete fades, stains, and cracks under DFW sun. A properly prepped coating turns a tired slab into a finished, easy-to-clean surface that lasts — and looks like it belongs to the house.
- Cooler walking surfaces in summer
- Lower maintenance than bare concrete
- Refreshes worn slabs without replacement
- Higher visual value for resale & rental
- Custom color + texture matched to your home
- Durable for pets, parties, and daily use
Slip-Resistant Finishes
Textured systems for wet zones — pool decks, walkways, and entries.
UV + Fade Resistance
Polyaspartic topcoats tuned for full Texas sun and heat cycling.
Decorative Flexibility
Solid color, flake, spray deck, stamp, and wood-plank from one provider.
Fast Turnaround
Structured prep and a staged cure process keep projects moving — with your timeline confirmed upfront.
One crew. Every concrete surface.
Garage, patio, pool deck, or interior floor — we handle surface prep through final seal. Tap any system to start a free estimate.
Coatings & decorative concrete across DFW
Real finishes, built by our own crew — no subcontractors, no exceptions.
Pick a color from real cards — not a tiny chip
Solid color, blended flake, spray-deck texture, and stamped tones, matched to your home. Browse the full color cards below, then we confirm your final color from physical samples at the estimate.
Proline Dura Colors
Solid-color & stamped concrete
Spray Deck Neutrals
Cool-deck & pool deck coatings
Flake & Metallic Blends
Garage & interior epoxy
Full color charts
Tap any chart to open the official color card.
PDF 
PDF 
PDF 
PDF 
View 
View 
View 
View 
View Color cards reflect the Proline, SGM, Torginol, APF, and Westcoat systems CertiPro installs. Printed and on-screen colors are approximate — final color is selected from physical samples at your in-home estimate.
Stamp pattern families
Get the look of natural stone, brick, or wood plank — stamped and colored into one durable slab. We carry the full pattern library and match it to your home's style.
Random Stone
Arizona Flagstone, Castle Stone, Canyon Stone, Sedona Stone, and San Diego Flagstone — natural random layouts.
Seamless Skins
Blue Stone, Flamed Granite, Roman Slate, Quarry Stone, and Travertine for a continuous natural-stone surface.
Wood Plank
Random Boardwalk planks, reclaimed timber, and hand-hewn looks — the warmth of wood, the durability of concrete.
Cobblestone
Cut Stone, Old Cobblestone, and Appian Cobblestone for classic old-world driveways and walkways.
Ashlar
Versailles tumbled travertine, Roman Slate, and quarried-stone ashlar patterns — clean and timeless.
Brick, Bands & Medallions
Herringbone, running bond, and basketweave brick, plus decorative border bands and center medallions.
Local crew. Proper prep. No subcontractors.
A coating is only as good as the prep underneath it. We're based out of White Settlement, we grind and profile every slab the right way, and the team that quotes your job is the team that coats it.
Licensed & Insured
Texas-licensed contractor. Family-operated, not a franchise.
No Subcontractors
The crew that estimates does the prep and the coating. Same faces, start to finish.
UV-Stable Systems
Polyaspartic topcoats that resist yellowing in full Texas sun.
Financing Available
Flexible options on qualifying projects. Ask at your estimate.
Concrete coatings that hold up to Texas heat
A garage floor that flakes, a pool deck that scorches bare feet, a patio that's faded to gray — bare and builder-grade concrete doesn't age well in DFW. The right coating fixes the look and the function at once, and a properly prepped surface lasts years instead of peeling in a season.
We coat and resurface garage floors, driveways, patios, walkways, pool decks, and interior concrete across Fort Worth, Arlington, Mansfield, and the entire west DFW corridor — epoxy flake, polyaspartic, stamped concrete, spray-deck, and decorative stains, all from one crew under the CertiPro Coatings division.
Every project starts with a free in-home estimate. We look at the real condition of your slab — cracks, moisture, prior coatings — because that's what determines which system fits and what the surface needs first. No generic phone pricing.
Then we prep it right: diamond grinding or shot-blasting to profile the concrete, crack and spall repair, and the correct primer for the system — the steps that separate a coating that lasts from one that lifts.
What sets us apart
-
Prep Done Right
We diamond-grind or shot-blast every slab to a proper profile and repair cracks before a drop of coating goes down. Skipping this is why bargain coatings peel — we don't skip it.
-
UV-Stable Topcoats
We finish with polyaspartic topcoats rated for full sun, so your garage, patio, or pool deck holds its color and gloss through Texas summers instead of yellowing.
-
One Crew, One Estimate
Garage, patio, pool deck, interior floors — whatever the mix, it's the same licensed CertiPro crew and a single estimate. No subcontractor handoffs.
-
Honest Slab Assessment
If a slab is too far gone to coat well, we tell you — and quote the resurface or replacement instead of selling you a finish that won't hold.
Serving all of DFW West
Based in White Settlement — our crews live in the neighborhoods we coat. If your city isn't listed, call us; we likely cover it.
(214) 974-8375From first call to finished surface
Four steps. No surprises.
Free In-Home Estimate
We come out, measure the real space, and check the slab condition — then quote the right system. No generic phone pricing.
Surface Prep
Diamond grinding or shot-blasting to profile the concrete, plus crack and spall repair. The step that makes a coating last.
Coat & Finish
Base coat, flake or stamp, color, and UV-stable topcoat — applied in the right sequence and cure windows, with the timeline confirmed upfront at your estimate.
Walkthrough
We review the finished surface with you and hand off cure and care instructions. We don't leave until it's right.
Free Concrete Coating Estimate
Tell us about your space — garage, patio, pool deck, or interior. We'll get back within 2 business hours.
Got it. Neil's on it.
You'll get a call from (214) 974-8375 within 2 business hours.
Concrete coating questions answered
The questions DFW homeowners ask before coating their concrete.
How much does an epoxy garage floor or concrete coating cost?
It depends on square footage, the condition of the existing slab, and the system you choose — a flake epoxy garage floor is priced differently than a stamped patio or a pool deck resurface. Rather than quote a misleading range over the phone, we measure the actual space at a free in-home estimate and give you a firm number. Financing is available on qualifying projects.
How long does an epoxy or polyaspartic garage floor take to install?
It depends on the system and the condition of your slab, but many residential garage floors are completed in about a day or two — and polyaspartic systems cure faster than traditional epoxy, so the surface is usable sooner. We give you the exact timeline and cure schedule for your specific job at your free in-home estimate, before any work starts.
Are concrete coatings and stamped concrete slippery?
They don't have to be. For garages, pool decks, and walkways we add a slip-resistant aggregate to the topcoat. Pool deck and spray-deck systems are specifically textured to stay grippier and cooler underfoot than bare concrete. We match the texture to where the surface is going.
Will the color and finish hold up in Texas heat and sun?
That's exactly why we top coatings with UV-stable polyaspartic instead of bare epoxy, which can yellow and chalk in direct sun. Exterior stamped and spray-deck finishes are sealed for UV and freeze-thaw. The systems we install are built for full DFW sun exposure and heat cycling.
Can you coat or resurface my existing concrete instead of replacing it?
In most cases, yes. Worn, stained, or lightly cracked slabs are great candidates for a decorative overlay or resurface — you get a brand-new surface without the cost and mess of a tear-out. We assess the slab during the estimate and tell you honestly if it's sound enough to coat or if replacement is the smarter long-term call.
What surfaces can CertiPro coat?
Garage floors, driveways, patios, walkways, pool decks, porches, and interior concrete floors. Whether you want a high-gloss flake garage, a stamped backyard patio, a cooler pool deck, or stained interior concrete, it's the same crew and one estimate covers the whole project.
Ready to coat your concrete?
Free in-home estimate. No obligation. Garage floors, patios, pool decks, and interior concrete across DFW.
Tell us about your backyard.
We'll design it.
30 seconds to fill out. 48 hours to your design.
Got it. Neil's on it.
You'll get a call from
(214) 974-8375
within 2 business hours.